Commercial Solutions
Branch circuit facility filters for dedicated lines.
Please call our Customer Service/Technical Support Department at 1-800-996-6696 for technical assistance, phone orders, or volume pricing, Mon.-Fri., 8 a.m. – 4 p.m. Eastern Time. You may also fax your order to our 24 hour fax line at 908-996-7773. We accept most major domestic credit cards. Orders are non-cancellable, non-returnable. All units come with a 10 year warranty. Custom configurations are available for large volume purchases.
Note: These products may also be installed in countries operating at 100-175V. Enhanced 240V modules are also available. Installation by a professional electrician is required.
FF1 Series
FF1-8W-120 - #002-00076
- Branch circuit protection in a NEMA 1 steel enclosure
- 8 amp capacity, for 120V applications
- Quick Disconnects
- Easy to install – no long lead wires required
- Flexible location – install anywhere between the panel and load
- 10″ H x 8″ W x 4″ D
- 6 lbs.
- Suggested applications – fire alarm & security systems, building automation, LED lighting, scales, water treatment controls, hard wired equipment, and to isolate sensitive electronics sharing the circuit with non-sensitive electronics.
FF1 Series
FF1-20W-120 - #002-00072
- Branch circuit protection in a NEMA 1 steel enclosure
- Protects (1) 20 amp branch circuit
- Can protect an entire room
- Screw Terminal Block
- Easy to install – no long lead wires required
- Flexible location – install anywhere between the panel and load
- 20 amp capacity, for 120V applications
- 10″ H x 8″ W x 4″ D
- 8.25 lbs.
- Suggested applications – Dedicated lines to point of sale systems, drive-thrus, digital menu boards, kiosks, IT & A/V equipment, fire alarm & security systems, building automation, home office, CNC systems, PLCs, LED lighting, heating and water treatment controllers, and hard wired equipment.
FF1 Series
FF1-20W-240UB - #002-03073
- Branch circuit protection in a NEMA 1 steel enclosure
- Protects (2) 120V/20 amp branch circuits or (1) 240V split phase circuit
- Can protect 2 or more rooms
- Euro-connectors
- Easy to install – no long lead wires required
- Flexible location – install anywhere between the panel and load
- 12″ H x 12″ W x 4″ D
- 15.5 lbs.
- Suggested applications – Dedicated lines to point of sale systems, drive-thrus, digital menu boards, kiosks, IT & A/V equipment, fire alarm & security systems, building automation, home office, CNC systems, PLCs, LED lighting, heating and water treatment controllers, and hard wired equipment.
FF1 Series
FF1-100W-120B - #002-03078
- Branch circuit protection in a NEMA 1 steel enclosure
- Protects (5) 120V/20 amp branch circuits
- Can protect several rooms
- Euro-connectors
- Easy to install – no long lead wires required
- Flexible location – install anywhere between the panel and load
- 18″ H x 18″ W x 4″D
- 28 lbs.
- Suggested applications – Dedicated lines to point of sale systems, drive-thrus, digital menu boards, kiosks, IT & A/V equipment, fire alarm & security systems, building automation, home office, CNC systems, PLCs, LED lighting, heating and water treatment controllers, and hard wired equipment.
FF2 Series
FF2-5W-120-DIN - #002-00090
- Fully enclosed DIN rail mount in a magnetic shielded steel cabinet
- 4 directional (0/180 or 90/270 degrees), spring loaded DIN adapter fits 32-35 mm DIN rail
- Exterior ground screw, terminal block, and resettable circuit breaker (no user serviceable parts inside)
- Operates over a wide voltage range and is compatible with switch mode power supply voltage ranges.
- 5 amp capacity, for 120V applications
- 7″ H x 4″ W x 3″ D without connectors; 7.5″ H x 4″ W x 3.5″ D with connectors
- Suggested applications – PLC, industrial automation, control panels, and AC distribution.
FF4 Series
FF4-5W-120 - #002-00628
- Branch circuit protection in a NEMA 4 weather tight enclosure
- 5 amp capacity, for 120V applications
- Flexible location – install anywhere between the panel and load
- 180mm H x 110mm W x 90 mm D
- 1.5 lbs
- Suggested applications – barn, agricultural equipment, water treatment controls, and damp environments where splash can occur.
FF4 Series
FF4-20W-120 - #002-00620
- Branch circuit protection in a NEMA 4 weather tight enclosure
- Protects (1) 20 amp branch circuit
- Screw Terminal Block
- Easy to install – no long lead wires required
- Flexible location – install anywhere between the panel and load
- 20 amp capacity, for 120V applications
- 11.34″ H x 11.34″ W x 4.84″ D
- 7 lbs.
- Suggested applications – barn, agricultural equipment, water treatment controls, and damp environments where splash can occur.
FF4 Series
FF4-20W-240U - #002-00621
- Branch circuit protection in a NEMA 4 weather tight enclosure
- Protects (2) 120V/20 amp branch circuits or (1) 240V split phase circuit
- Screw terminal block
- Easy to install – no long lead wires required
- Flexible location – install anywhere between the panel and load
- 15.28″ H x 11.34″ W x 4.84″ D
- 10.5 lbs
- Suggested applications – Barn, agricultural equipment, water treatment controls, and damp environments where splash can occur.
Need more information?
Click on the links below. For pricing, product recommendations, or application questions, please give us a call at 800-996-6696 (M-F, 8 am – 4 pm) or use the Contact Us button and our knowledgeable support team will get back to you.
Certifications Product Comparison Waveforms Product Specifications Services